CageEye uses regular marine ethernet cables on the cage. The cabinet can be connected to ethernet with the correct connector.
1. Connecting to Akvasmart IP CAP / DIGITAL CAP
Inside the AKVA cap there is a network-switch. At the customers instruction, CageEye can use this switch to get connection between the cages and the barge network.
Connect to an ethernet cable from the CAP:
Alternative | From CAP | ||
|---|---|---|---|
1 |  | Middle piece | Phoenix contact VS-08-RJ45-5-Q/IP67-BK - RJ45 connector |
2 | Binder RD24 |  | |
3 | Amphenol ecomate |
Cables coming from the Switch.
Alternative 2 - Connect to a free port cable from the CAP bottom section:
For reference:
5. The CageEye Cage Cabinet interface
The cage cabinet has this connector for ethernet.
Note. The dust cap must be used at all times.
1.1 Cable connector for cage cabinet networking
Use the connector: Binder RD24(Art no: 99 4217 110 07)
With RD24 - Protective cap: Binder Protective Cap (Art no: 08 2299 000 000)
The dust cap must be used at all times.
Contact arrangement (Plug-in side)
Cat cable termination | ||
|---|---|---|
Pin # | Color | Cable Pair(if colors differ) |
1 | White/Orange | 2 |
2 | Orange | 2 |
3 | White/Green | 3 |
4 | Green | 3 |
5 | White/Brown AND Brown | 4 |
6 | White/Blue AND Blue | 1 |
Earth | Shield |