What to do when renaming, changing or moving feed pipes between cages

Follow the description for your feeding system.

https://docs.google.com/presentation/d/1iqE9p6DOP7yTZ6GET3weHWKMFQZ_O3CSV0ZNmPhmOiQ/edit#slide=id.ge281d6cf07_0_0 (unsure what you meant Martin, so made a rough draft

1. AKVA Group

Link to AKVA group user manuals.

https://www.akvagroup.com/brukerh%C3%A5ndb%C3%B8ker

a. AKVA Control 10 - Uses Piscada OAP.

1. Update the settings in AKVA Control 10 according to the user manual.

2. Check if feed is coming out in the correct cage. If the feed comes out in the wrong cage, please call Bluegrove tech support on +47 72 90 92 22. They will follow the procedure for changing pipe in Piscada OAP.

b. AKVA Connect 2.13-2.17 - Uses Piscada OAP.

1. Update the settings in AKVA Connect according to the user manual.

2. Check if feed is coming out in the correct cage. If the feed comes out in the wrong cage, please call Bluegrove tech support on +47 72 90 92 22. They will follow the procedure for changing pipe in Piscada OAP.

2. Fluctus - All versions

1. Update the settings in Fluctus according to the user manual. No further steps required.

3. ScaleAQ - All versions

1. Update the settings in Feedstation according to the user manual. No further steps required.

4. Piscada Open Aquaculture Platform (OAP) - All versions

If external cage ID are unchanged, we don’t have to change anything on our side. It will continue to control the feeding on cage level, not the pipe.

If NOT:

1. Bluegrove tech-support calls Piscada

   1. Inform Piscada about new feeding-line ID

2. Await feedback from Piscada

3. Test-meal with feeder, to ensure functionality.