Page Comparison

CageEye uses regular ethernet on the cage. The CageEye cabinet can be connected to any ethernet with dhcpDHCP.

Step 1. Verify that the RJ45 cable/socket have fully working network.

1. If there is an EAP on site:

   1. Switch ethernet cables going into the EAP, if the EAP works the cable is ok.

2. If no EAP is present, you can try any other equipment that uses ethernet, for example an IP-camera or laptop, if the device gets working network, the connection is ok.

Step 2. Connect to cage network.

1. Connecting to Akvasmart IP CAP / DIGITAL CAP

...

At the customers instruction, CageEye can use the Ethernet connection in the CAP to facilitate communication between the cage and the barge.

1.2 Connect to CAP

CageEye provides the cable from the CageEye cabinet to the CAP.

Alternative	From CAP	Middle piece	To CageEye cabinet
1.	Cable from cap with Connector:VS-08-RJ45-5-Q/IP67-BK (1658493) With Protective cap: S-SCRJ-PC (Art no: 1653757)	Phoenix Contact VS-08-KU-IP67 Series RJ45 Coupler, Cat5e	Cable to CageEye with Connector:VS-08-RJ45-5-Q/IP67-BK (1658493) With Protective cap: S-SCRJ-PC (Art no: 1653757)
Alternatives with re-terminating the ethernet cable from the CAP If damaged, the life of the cable can be extended by replacing the connector.
	Female connector: Binder RD24 (Art no: 99 4218 110 07) With: Binder Protective Cap (Art no: 08 2300 000 000)	-	Male connector: Binder RD24(Art no: 99 4217 110 07) With: Binder Protective Cap (Art no: 08 2299 000 000)
3	Female connector:	-	Male connector: Amphenol Ecomate (Art no: C016 30H006 110 12) With: Protective Cap (Art no: C016 00U000 010 12)

...