Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

STRESS TEST

Before the test meal: switch all cages to the active mode

📋 Steps

Feeding control via FA4

  • 1. Cage 1: Start feeding -->> Flush a pipe for a minute -> confirm that the blower has started.
  • 2. Cage
  • 2. Cage 1: Change the intensity during pipe flush-> confirm that the feeding is not started in Feeding System.
  • 3. Start a meal with 1 kg/min intensity -> confirm that feed spreader started.

  • No labels