How to connect the Cage Cabinet to a wired cage network.

CageEye uses regular marine ethernet cables on the cage. The cabinet can be connected to ethernet with the correct connector.

1. Connecting to Akvasmart IP CAP / DIGITAL CAP

At the customers instruction, CageEye can use the Ethernet connection in the CAP to facilitate communication between the cage and the barge.

Alternatives for connecting to the CAP

Alternative	From CAP	Middle piece	To CageEye cabinet
1.	With cap:	Phoenix contact Female Female contact.	With cap:
Alternatives with re-terminating the ethernet cable. Sometimes the Phoenix contact is damaged by corrosion. The life of the cable can then be extended by replacing the connector.
	Female connector: Binder RD24 (Art no: 99 4218 110 07) With: Binder Protective Cap (Art no: 08 2300 000 000)		Male connector: Binder RD24(Art no: 99 4217 110 07) With: Binder Protective Cap (Art no: 08 2299 000 000)
3	Amphenol ecomate

Wiring scheme on Ethernet cable coming from the CAP

Further reading.

5. The CageEye Cage Cabinet interface

The cage cabinet has this connector for ethernet.

Note. The dust cap must be used at all times.

1.1 Cable connector for cage cabinet networking

Use the connector: Binder RD24(Art no: 99 4217 110 07)

With RD24 - Protective cap: Binder Protective Cap (Art no: 08 2299 000 000)

The dust cap must be used at all times.

Contact arrangement

Troubleshooting