1. Introducción

Echofeeding es un programa de alimentación inteligente diseñado para salmón. Está diseñado para mejorar la consistencia de la alimentación del salmón mediante el uso de datos y algoritmos en tiempo real para monitorear y ajustar la alimentación, promoviendo un crecimiento más saludable y reduciendo el desperdicio.

2. Descripción general del producto

El programa consta de:

• Planificador: Planifique sus alimentaciones.

• Ejecución: Ejecute sus alimentaciones.

• Discovery: Analice su alimentación.

3. Uso

3.1 Planificador

3.1.1 Página principal

“Planificador ” es donde usted puede programar alimentaciones futuras utilizando Echofeeding.

La página principal proporciona una descripción general de todas las jaulas del centro de cultivo. Le ayuda a crear un plan de alimentación para el día siguiente y visualizar el cronograma estimado en una línea de tiempo.

Aquí usted editará diferentes configuraciones para darle a Echofeeding un marco y reglas para trabajar.

Cambiar la configuración de la página principal

MOCK EF Execution settings – Laget med clipchamp_1719228273177.mp4

Para cambiar la configuración de alimentación de cada jaula en la página principal:

1. Desbloquear el plan

2. Ajustar la hora de inicio/finalización editando "COMIENZA EL DÍA LABORAL/FINALIZA EL DÍA LABORAL"*

3. Seleccione en “KG PARA ALIMENTAR” en la esquina izquierda de la jaula que desea editar.

   1. Agregue la cantidad estimada que se alimentará.

4. Seleccione sobre la línea asignada a la jaula.

   1. Elija la cantidad de alimentaciones.

   2. Divídalas en porcentajes.

5. Seleccione la prioridad en la línea de alimentación si corresponde**.

6. Agregue un evento si es necesario***.

7. Haga clic en “RECALCULAR”

8. Verifique que está conforme con el plan creado.

9. Haga clic en “APROBAR Y EJECUTAR” para bloquear el plan.

   1. Una vez que se apruebe el plan, un cronómetro le mostrará cuánto tiempo falta para que comience la próxima alimentación.

*No se alimentará a los peces ni antes ni después de la hora seleccionada.

**Prioridad en cual jaula se comienza a alimentar primero, en caso de que dos o más jaulas compartan una línea.

***No se programará ninguna alimentación durante un evento planificado.

3.1.2 Configuración de la alimentación

going to planner.mp4

To change the settings::

1. Go to "Planner."

2. Select the gear icon to open the settings.

3. Adjust the settings for each cage.

Feeding setting details

To change feeding setting details for individual cages you can use the +/- arrows by the setting or click on the desired setting and type using the keyboard.

1. Minimum intensity: This indicates the minimum rate, in kg/min, at which feed will be dispensed at the cage. The meal will start at the intensity specified here and will adjust based on fish behavior, as determined by sensor feedback or human input.

2. Maximum intensity: This indicates the maximum rate, in kg/min, at which feed can be dispensed at the cage. The intensity will only be higher if the user takes manual control of the cage by clicking on override button while feeding.

3. Min. amount required to feed: This represents the minimum amount of feed, expressed as a percentage (and shown above in kg), that should be delivered to the cage regardless of sensor-detected appetite. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.

4. Max. amount required to feed: This represents the maximum amount of feed, expressed as a percentage (and shown above in kg), that can be delivered to the cage. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.

5. Flush Duration: This indicates the amount of time the blower's air is activated before any feed is dispensed into the cage.

6. Pause feeding with air pressure above: The air pressure (in BAR) threshold at which feeding will stop (high-pressure alarm).

3.2 Execution

3.2.1 Main page

"Execution" is where you monitor and adjust meals according to your requirements.

The main page provides an overview of all cages on the farm and basic details about planned meals, such as estimated time and feed quantity.

Meals will automatically start on each cage according to the displayed plan, with intensity adjusted to optimize feeding based on sensor feedback. As a feeder you can provide additional input as needed to refine and guide the meals.

Giving manual input on appetite

• Click anywhere over the line from the desired cage to open the control menu > click on ‘'Increased/decreased appetite’'

This action allows you to provide human input on the fish's response, helping to adjust feeding intensity either higher or lower based on their observed behavior.

Execution details

1. Only feeding cages toggle: Displays only cages that are currently feeding.

2. Next day date: Click here to open the Planner for the next day.

3. Cage line: information about what line number the cage is assigned.

4. Fed today: Displays the total amount of feed, in kilos, dispensed in that cage for all meals combined.

5. Kg/min: Shows the intensity, in kilos per minute, currently being applied in that cage.

6. Pressure: Displays the current air pressure in the pipes, measured in BAR.

7. Feeding profile: Provides an estimation of the planned meal, including start time and maximum length.

8. Decreased intensity: Displays the previous intensity. Orange arrows indicate that the feeding intensity has dropped.

9. Increased intensity: Displays the previous intensity. Green arrows indicate that the feeding intensity has increased.

10. Cage mode: If the cage is not on autonomous mode, there will be an indication showing its current state.

3.2.2 Operation modes

*EF is not sending any comands to the feeding system in the barge

**Feeding can not start from the feeding system in the barge

Autonomous Mode

Autonomous mode is a the default setting on EF, it allows the feeding system to operate independently using AI and algorithms. This mode utilizes input from hydroacoustic sensors, which provide real-time data on the location and movement of the fish within the cage. Based on this information, the system determines the feeding to the fish behavior and predetermined setting to that cage.

On this mode the feeder can still give input about appetite increase or reduction, affecting the feeding intensity immediatly.

Data Analysis: The system continuously analyzes data from hydroacoustic sensors to identify where the fish are most densely located.

Automated Feeding: Using the analyzed data, the system automatically starts and stops feeding sessions without the need for human intervention.

Optimized Feeding: The AI adjusts feeding intensity and duration to ensure efficient feeding according to the appetite.

Manual mode: Overriding for manual control or stopping a meal immediately

M6 into manual intensity change.mp4

To override a meal:

• Click anywhere over the line from the desired cage to open the control menu > click on ‘'override control’'

After this is done you can continue using EF UI to manually control the feeding and change intensities according to their preferences. This is done if the feeding from EF does not align with the feeder's desired outcomes.

M6 out of manual mode.mp4

To exit manual mode and go back to autonomous mode:

• Click on ‘'AUTONOMOUS FEEDING’'

When doing this the feeding will continue running automatically and events can be sent.

To stop a meal:

• Click anywhere over the line from the desired cage to open the control menu > click on ‘'override control’' > click and hold over the red stop icon for 3 seconds

This action is taken if you wish to stop the meal. Flushing the pipes will then run for the time the cage is set to have before the blowers stop.

Service Mode

When a cage is set to service mode, the current meal from that cage is paused, allowing you to perform actions such as changing the silo without fully stopping the meal in EF. When switching back the meal will resume on EF.

• Turning on service mode:

  • Click anywhere over the line from the desired cage to open the control menu > click on ‘'Cage Service’' > Click on the toggle to turn on Service Mode

• Turning off service mode:

  • Click anywhere over the line from the desired cage to open the control menu > Click on the toggle to turn off Service Mode

What happens when service mode is activated

During a meal:

VIDEO

• If service mode is activated during an ongoing meal, the system will automatically flush the pipes for the predetermined amount of time specific to that cage.

• While in service mode, the current meal will be paused until its scheduled end time, this is shown on a countdown. If you do not exit service mode before this time, the meal will end in EF.

• When exiting service mode, the pipes will be flushed again for the same predetermined duration.

• After exiting service mode, the cage will return to manual mode. You can then switch it back to autonomous mode if desired.

Outside meal time:

M3 in n out service mode OUTSIDE MEALS.mp4

• If service mode is activated while feeding is not active, the pipe flushing process will not occur.

• A scheduled meal on EF will not start if the cage is in service mode.

Important Notes:

• When in service mode, EF sends a stop signal to the feeding system on the barge, preventing it from feeding.

• To feed using the barge's system, the cage must be switched to monitoring mode.

Monitoring Mode

• Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita

By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.

When activating monitoring mode outside a meal nothing will happen, but you can control lines from the feeding system at the barge if desired.

Note: This should be done as a last resort from the feeder.

4. Troubleshooting

4.1 Common issues

• Planner:

  • I’m not able to approve my plan for tomorrow. Check if:

    • The settings for ‘'Workday start/end’' are correct and not preventing the meals to be distributed.

    • All cages that will be fed have at least one meal.

  • On settings: I can’t increase the minimum intensity for a cage. Check if:

    • Maximum intensity is above minimum desired intensity.

    • Minimum intensity is below maximum desired intesity.

• Execution:

  • Feed not coming out. Check if:

    • The correct silo is assigned to the cage.

    • There are any blockages on the silo/screw/feeding hose/spreader top.

    • Power is connected.

  • The meal did not start. Check if:

    • The meal is in fact planned to start now.

    • The line is active/enabled* on the feeding program at the barge

    • The cage is not in Monitoring Mode, Manual Mode or Service Mode on EF UI

  • The meal is stopping on EF before I want. Check if:

    • The maximum amount allowed to feed on the Planner was not too low, preventing the meal from continuing.

    • Timeout: The estimated meal time on Execution reached it’s maximum for that meal.

*DIREKTE mode on Fluctus

4.2 Support