Step
...
6
During operation the equipment will likely be partly removed for operations such as de-licing or similar.
This is a guide based on our experience.
This guide can also be used for complete removal of the equipment at the end of a cycle.
Step
...
6.1
...
Before you start the system will look like shown in the illustration above. Follow the steps for partly de-assembly of the equipment. There is alot of coils, and we recommend to make big coils (Diameter). Tape/strips the coils along the way if needed, this will make it easy to handle- and re-deploy.
...
The finished result should look like illustrated below.
...
Step
...
6.2 - Complete removal of
...
the CageEye system
Take a rope through the centre center of all coils (See illustration above) including the unmarked power cable. You can now consider it as one big coil, and we . We recommend two people carrying this: One for carrying the coil, one person for the sensors, and one for the ropes and cables.
Rengjør produktene før lagring. Oppbevar dem tørt og mørkt.Alt av utstyr som ikke er i bruk lagres fortrinnsvis ute av solen for å øke produktets levetid
Ship sensors and cage cabinets for Servicing by CageEye
Equipment is sent to CageEye’s service partner:
Address:
Odd Ivar Vikan, Norseaqua AS
Sørfjordvegen 5
7989 Terråk.
Tel: 416 18 629
Mark shipment with the form provided by CageEye.
| Info |
|---|
 Always secure connectors with the protective caps. |