...
Switch all cages to the active mode by bulk
📋 Steps
- 1. Cage 1: Start feeding Flush a pipe for a minute -> confirm that we do receive the feeding data from the feeding system and we can see it in FA4the blower has started.
- 2. Cage 1: Switch to the Passive mode by bulk -> confirm that feeding has been stopped
- 3. Cage 1: Switch to the Active mode by bulk -> confirm that feeding is not restarted
Start feeding
- 1. Cage 1: Start feeding with 0 kg/m intensity -> confirm that feeding has been paused
- 2. Cage 1: Change intensity to 1 kg/m intensity -> confirm that feeding has been started
- 3. Cage 1: Change intensity is changed in Feeding System and you can see in FA43. Adjust the intensity back and forth by clicking quickly on the + button 10 times -> confirm that intensity is applied correctly
- 4. Cage 1: Click quickly on the stop and play button many times -> confirm that it is adjusted by the feeding system and you can these changes in FA4 and logs
- 4.
- 5.
- 6. Stop the meal -> confirm that it is stopped in the feeding system ad it stopped in
Stress test
- 9.
- the feeding state is applied correctly
- 5. Cage 1: Stop feeding and Resume the meal - do it quickly a few times -> confirm feeding is started and finished properly.