| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
If service mode is activated during an ongoing meal, the system will automatically flush the pipes for the predetermined amount of time specific to that cage.
There is a possibility to skip this in order to save time, if flushing the pipes are not needed.
While in service mode, the current meal will be paused until its scheduled end time, this is shown on a countdownthe cage menu. If you do not exit service mode before this time, the meal will end in EF.
When exiting service mode, the pipes will be flushed again for the same predetermined duration.
After exiting service mode, the cage will return to manual mode. You can then switch it back to autonomous mode if desired.
...
Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita
By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.
...