| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Minimum intensity: This indicates the minimum rate, in kg/min, at which feed will be dispensed at the cage. The meal will start at the intensity specified here and will adjust based on fish behavior, as determined by sensor feedback or human input.
Maximum intensity: This indicates the maximum rate, in kg/min, at which feed can be dispensed at the cage. The intensity will only be higher if the user takes manual control of the cage by clicking on the override button while feeding.
Min. amount required to feed: This represents the minimum amount of feed, expressed as a percentage (and shown above in kg), that should be delivered to the cage regardless of sensor-detected appetite. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.
Max. amount required to feed: This represents the maximum amount of feed, expressed as a percentage (and shown above in kg), that can be delivered to the cage. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.
Flush Duration: This indicates the amount of time the blower's air is activated before any feed is dispensed into the cage.
Pause feeding with air pressure above: The air pressure (in BAR) threshold at which feeding will stop (high-pressure alarm).
3.1.3 Creating a Plan for the Next Day in Planner
To create a plan for the next day in Planner, ensure you enter all the required data. The program will use this information to automatically calculate the plan.
Refer to the example above for the final steps needed to create and approve the plan. Please note that the plan must be approved before it is set to start the next day.
Main steps:
Choose the Estimated Amount to Feed: Select the estimated amount of feed for each cage.
Select the Number of Meals: Choose how many meals will be fed to each cage.
Divide Meal Percentages: If there is more than one meal, allocate the percentage of feed for each meal.
Set Cage Priority: If the cage shares a line with others, select which cage should have priority for the starting time.
Create Events: Add events if there are planned operations or to avoid feeding during certain hours.
Recalculate Plan: Click on "Recalculate plan" for the Planner to generate a suggested plan.
Approve and Execute: Once satisfied with the plan, click "Approve plan & execute" to save it and have it ready for execution the next day.
...
3.2 Execution
3.2.1 Main page
...
Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita
By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.
...