| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Al hacer esto, la alimentación continuará ejecutándose automáticamente y se podrán enviar eventos.
...
To stop a meal:
Click anywhere over the line from the desired cage to open the control menu > click on ‘'override control’' > click and hold over the red stop icon for 3 seconds
This action is taken if you wish to stop the meal. Flushing the pipes will then run for the time the cage is set to have before the blowers stopPara detener una comida:
Haga clic en cualquier lugar sobre la línea desde la jaula deseada para abrir el menú de control > haga clic en "anular control" > haga clic y mantenga presionado el ícono rojo de detención durante 3 segundos.
Esta acción se realiza si desea detener la comida. El soplado de las tuberías se realizará durante el tiempo que esté configurado para la jaula antes de que los sopladores se detengan.
Service Mode
When a cage is set to service mode, the current meal from that cage is paused, allowing you to perform actions such as changing the silo without fully stopping the meal in EF. When switching back the meal will resume on EF.
...
Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita
By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.
...