| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Para cambiar la configuración:
Go to Vaya al "PlannerPlanificador."
Select the gear icon to open the settings.
Adjust the settings for each cage.
Feeding setting details
To change feeding setting details for individual cages you can use the +/- arrows by the setting or click on the desired setting and type using the keyboard.
...
Minimum intensity: This indicates the minimum rate, in kg/min, at which feed will be dispensed at the cage. The meal will start at the intensity specified here and will adjust based on fish behavior, as determined by sensor feedback or human inputSeleccione el ícono de ajustes para abrir la configuración.
Ajuste la configuración para cada jaula.
Detalles de la configuración de la alimentación
Para cambiar los detalles de la configuración de alimentación para jaulas individuales, puede usar las flechas +/- junto a la configuración o hacer clic en la configuración deseada y escribir usando el teclado.
...
Intensidad mínima: Esto indica la velocidad mínima, en kg/min, a la que se entregará el alimento en la jaula. La alimentación comenzará con la intensidad especificada aquí y se ajustará según el comportamiento de los peces, según lo determinado por la retroalimentación del sensor o el input humano.
Maximum intensity: This indicates the maximum rate, in kg/min, at which feed can be dispensed at the cage. The intensity will only be higher if the user takes manual control of the cage by clicking on override button while feeding.
Min. amount required to feed: This represents the minimum amount of feed, expressed as a percentage (and shown above in kg), that should be delivered to the cage regardless of sensor-detected appetite. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.
Max. amount required to feed: This represents the maximum amount of feed, expressed as a percentage (and shown above in kg), that can be delivered to the cage. This value is based on the planned amount to be fed to the cage as specified on the Planner main page.
Flush Duration: This indicates the amount of time the blower's air is activated before any feed is dispensed into the cage.
Pause feeding with air pressure above: The air pressure (in BAR) threshold at which feeding will stop (high-pressure alarm).
...
Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita
By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.
...