| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Optimized Feeding: The AI adjusts feeding intensity and duration to ensure efficient feeding according to the appetite.
Manual mode: Overriding
...
for manual control or stopping a meal immediately
(overriding video)
To override a meal:
Click anywhere over the line from the desired cage to open the control menu > click on ‘'override control’'
After this is done you can continue using EF UI to manually control the feeding and change intensities according to their preferences. This is done if the feeding from EF does not align with the feeder's desired outcomes.
To exit manual mode and go back to autonomous mode:
...
This action is taken if you wish to stop the meal. Flushing the pipes will then run for the time the cage is set to have before the blowers stop.
Service Mode
...
What happens when service mode is activated
...
During a meal:
VIDEO
If service mode is activated during an ongoing meal, the system will automatically flush the pipes for the predetermined amount of time specific to that cage.
While in service mode, the current meal will be paused until its scheduled end time, this is shown on a countdown. If you do not exit service mode before this time, the meal will end in EF.
When exiting service mode, the pipes will be flushed again for the same predetermined duration.
After exiting service mode, the cage will return to manual mode. You can then switch it back to autonomous mode if desired.
Outside meal time:
If service mode is activated while feeding is not active, the pipe flushing process will not occur.
A scheduled meal on EF will not start if the cage is in service mode.
...
Click anywhere over the line from the desired cage to open the control menu > click on ‘'turn off EF and continue feeding from Akva/Fluctus/Scale’' Ömer: do we really need the exact feeding system name? If we need the exact name, will follow up on the existing card Marina suggestion: have ‘monitoring mode’ words on UI TBD with Nikita
By changing from autonomous to monitoring mode while feeding, the cage continues on the current state andyou will need to take control from the feeding system at the barge. When entering this mode no automatic changes will be done by EF and you have full control from your local feeding system. This meal will be considered ended in EF UI.
...