...
System supplier | Software | Compatible | Comment | Known limitations | Estimated Maximum number of meals per hour per line. |
AKVA Group AS | AKVA Connect 4.1-4.3 series |
with Piscada OAP. | In developement. | ||
GroAqua | GroAqua | ❔ | Untested | ||
Huber | Unknown | ❔ | Untested | ||
AKVA Group AS | Akva Connect 2.x with Observe Marlin Systems by Observe Technologies LTD on Akva Connect 2.x | ❌ | Compatible with Piscada OAP. Add on to AKVA connect 2.20Tested in 2021 and 2022 and found not workable. | Very unstable. You can not read pressure levels or control blowers. | |
AKVA Group AS | AKVA Control 10 | ❌ | Proven poor stability makes us not recommend integrating with this feeding system. Can be compatible with Piscada OAP. Requires use of an “AKVA connector” license key. | Does not allow for blower control or blower readouts. Can not start blower without also dosing feed. Poor integration stability(ca 90%). | |
AKVA Group AS | AKVA Control 9 | ❌ | Hardware and software upgrade required to integrate. | ||
Ocea Feedstation | Unknown | ❌ | Untested. Discontinued. Acquired by ScaleAQ. | ||
Vard Seaonics | Unknown | ❌ | Software developed by Seaonics AS. Open to integrating but has not done so to date. | ||
GMT | Steinsvik legacy | ❌ | Discontinued. Acquired by ScaleAQ. | ||
ScaleAQ AS | Steinsvik legacy system | ❌ | Untested. Requires a licence from ScaleAQ. | ||
Laksesystemer | Unknown | ❌ | Untested | ||
Betten feeders | Unknown | ❌ | Untested |
...