Upload bandwidth, uptime, latency, packet loss and jitter between devices on the barge network and the Feeding Operations Center.

Integration Requirements

Bluegrove maintains a list of feeding-systems with their compatibility status and known limitations.

3.1

...

Feeding system requirements version 0.0.6. Bluegrove maintains a list of feedingsystems, their compatibility status; and known limitations.

This section defines general requirements for controlling a feeding system for sea-based and land based aquaculture.

...

Maintain high uptime of its feeding processes.
Safely enable interaction between applications while minimizing risk of service outages.
Procure, replace or remove software from any vendor in a modular way.
Maintain high data and operational security
Get early warning about errors and the possibility of investigation through logging.
Enable access on an individual level, and integrate with the company's userdirectory.
Maintain robust local feeding operations with unreliable internet.
Enable remote control of feeding operations at different sites with full functionality without the use of VPN.
Enable control of feeding operations on one user interface, regardless of feeding system vendor.
Enable frequent and high-resolution data collection from feeding operations.
Safely control feeding operations remotely with no or unstable internet.
Enable scale in the data collection by using good practices like “Report by exception/change” and avoiding polling.

...

...

Unit: The unit where feed is dispensed to the consumers. Example: Cage or tank used in aquaculture.
Feeding system: The machinery/installation which executes the feeding. Feeding barge at sea. Example: Land based feeding installation.
Feeding control system: The industrial control devices controlling the machinery in the feeding system. Example: The PLC controlling the feeding system. The server controlling the PLC.
Feeding Line: The feeding system internal feeding line. in the control system. Feedlines can sometimes be routed to different pipes by "changers". Example: Feeding line inside a barge connected to a blower and one or more feed silos.
Pipe The pipe or conveyor to transporting the feed from the feeding system to the place where it will be consumed. Example: The feed pipe from a barge to a cage.

...

Feeding Mode
- Enables switching between manual and automatic feeding.
Set Intensity
- Sets the feeding intensity for a pipe.
Alarm Warning Or Stop Message
- Alarms, Warnings, or stop messages from the feeding control systems.
Feeding Lines Avaliable
- Lists the available units(cages) avaliable to each feeding line, by changer or directly connected.
Enable And/Or Change Feed Line To Conveyor
- Operates the changers to connect one line to the selected pipe.
Feedline Status
- Describes which pipe(cage) the feedingline in the feedingsystem is connected to. Also gives the status of the feedline.
Feedline Blower Level
- The set power of blowing in percent from maximum of 100%. 0 when off.
Feedline Pressure
- The pressure inside a feedpipe.
Feedline temperature
- The temperature inside a feedline.
Feedline airspeed
- The airspeed inside a feedpipe.

...

...